Rexnord 701-00008-064 Plain Sleeve Insert Bearings

seal type:Contact Seal; lubrication type:Lubrication Fitting; housing material:Cast Iron; expansion type:Non-Expansion Bearin; manufacturer catalog number:131058; mounting type:Two-Bolt Flange; length through bore:1.65 in; d:1.0000 in; duty type:Standard Duty; standards met:UL, AFBMA, AGMA, ASM;

B1:35.7 mm; S:9 mm; A4:27 mm; Weight:0.91 kg; N:11,5mm; C0:11.2 kN; d1:44.1 mm; L:83 mm; Designation of bearing:ES206-19G2T04; d:30.16 mm;

Cage Type:Stamped Steel; Cone Part Number:X33215; Ab - Cage-Cone Frontface Clearance:3.6 mm; a - Effective Center Location4:-8.6 mm; Series:33215; d:75.000 mm; DD:107.4 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:44900 N; db - Cone Backface Backing Diameter:89 mm; Cg - Geometry Factor

B:12 mm; da min:24 mm; ra max:0.6 mm; f0:13.9; Min operating temperature, Tmin:-25 °C; Max operating temperature, Tmax:110 °C; d:20 mm; Da max:38 mm; Fatigue limit load, Cu:0.23 kN; Mass:0.07 kg;

A:36.5 mm; C0:7.88 kN; H1:12.8 mm; A1:24.5 mm; T min.:-20 °C; Dz:60 mm; Designation of housing:PLE205N-; Z:47.3 mm; Designation of bearing:US205-16G2T20; T max.:200 °C;

B:1.9060 in; bore type:Round; bearing material:52100 Bearing Steel; housing type:Bearing Insert; cage material:Nylon; misalignment angle:1-1/2 °; D:2.4409 in; maximum rpm:3500 rpm; seal type:Contact; insert bearing type:Eccentric Lock - Wid;

Design Units:Imperial; Da - Cup Frontface Backing Diameter:5.75 in; Series:9100; r - Cup Backface To Clear Radius1:0.130 in; Y - ISO Factor3:0.91; D:6.0000 in; Cup Part Number:9121; Cg - Geometry Factor:0.0912; e - ISO Factor2:0.66; Db - Cup Backface Backing Diameter:5.12 in;

bearing type:Radial; ball diameter:5.7200 in; manufacturer catalog:www.aurorabearing.co; series:GEZ; ball material:Alloy Steel; closure type:Open; D:7.7500 in; inner ring width:4.3750 in; inner ring material:Steel; outer ring width:4.3750 in;

B:15 mm; d:25 mm; closure type:Double Shielded; D:52 mm; snap ring included:With Snap Ring; manufacturer upc number:029176014420; bore type:Round; internal clearance:Normal Clearance;

d:1.0000 in; inner ring width:39.6 mm; bore type:Round; outer ring width:17.5 mm; finish/coating:Uncoated; radial dynamic load capacity:4368 lb; seal type:Contact/Lip; manufacturer catalog number:128668; radial static load capacity:2538 lb; locking device:Concentric Collar;

seal type:Labyrnith non-contac; duty type:Heavy Duty; expansion type:Non-Expansion Bearin; d:2.2500 in; housing construction:Solid Housing; D:4.2400 in; housing material:Cast Steel; pilot diameter:5.0000 in; Weight:16 lbs; manufacturer catalog:Click here;

outer ring width:16 mm; maximum rpm:19000 RPM; D:110 mm; B:16 mm; ball screw application:Not for Ball Screws; bearing material:Steel (Balls&#x; operating temperature range:-30 to +100 &de; cage material:Phenolic Resin; d:80 mm; internal clearance:C0;

C1(2) - Dynamic Radial Rating (Two-Rows):9660000 N; Cg - Geometry Factor8:0.1067; B - Inner Ring Width:325 mm; Y2 - ISO Factor6:1.77; Reference Thermal Speed Rating (Grease):200; Reference Thermal Speed Rating (Oil)7:200; r - Outer Ring To Clear Radius2:6.000 mm; d:500.000 mm; D:830.000 mm; Design U

B:32 mm; Designation of bearing:US207G2T04; H2:95 mm; J:80 mm; C0:15.2 kN; A:48 mm; H1:13 mm; T max.:100 °C; Weight:1.42 kg; S:8.5 mm;